您好, 歡迎來到化工儀器網
產品分類品牌分類
-
離心機 凝點傾點測試儀 開口閃點測定儀 閉口閃點測定儀 運動粘度測定儀 微量水分測定儀 界面張力測定儀 變壓器油氣相色譜儀 脫氣振蕩儀 絕緣油體積電阻率測定儀 自燃點測定儀 空氣釋放值測定儀 氧化安定性測定儀 潤滑油泡沫特性測定儀 抗乳化性能測定儀 腐蝕銹蝕測定儀 絕緣油耐壓測試儀 水溶性酸及堿測定儀 汽油辛烷值測定儀 抽油機多用表 實際膠質測定儀 恩氏粘度 蒸餾測定儀 密度測定儀 硫含量測定儀 潤滑脂滴點測定儀 灰分測定儀 苯胺點測定儀 低溫測定儀 殘?zhí)繙y定儀 石油蠟含油量測定儀 鹽含量測定儀 烴類測定儀 萘結晶點測定儀 色度測定儀 蒸汽壓測定儀 機械雜質測定儀
產品簡介
詳細介紹
一、全自動開口閃點測定儀概述
KS-2008型全自動開口閃點測試儀，是根據中華人民共和國標準GB/T 3536《石油產品閃點和燃點測定法（克利夫蘭開口杯法）》所規定的要求設計制造的，適用于按該標準規定的方法，測定除燃料油和開口閃點低于79℃的石油產品克利蘭夫開口杯法閃點。
本儀器采用單片機控制技術，彩色液晶顯示屏，全中文人機對話界面，無標識鍵盤；對可預值閃點溫度、試樣標號、大氣壓強、試驗日期等參數，具有菜單提示，導向式輸入功能；應用開放式、模糊控制集成軟件、模塊化結構設計等技術。本儀器設計*，人機對話界面親切，操作使用方便，試驗結果準確，是理想的同類進口儀器的替代產品，可廣泛應用于鐵路、航空、電力、石油行業及大專院校、科研院所、計量檢測部門等單位作石油產品閃點和燃點的檢測和試驗。
二、全自動開口閃點測定儀主要技術指標和參數
1、工作電源 AC220V±10%， 50Hz
2、溫度測量 量程 室溫～400℃；
重復性 ≤4℃；
再現性 ≤8℃；
分辨性 0.1℃；
精度 0.5%；
3、升溫速度 符合GB/T3536標準；
4、點火方式 電子點火，氣體火焰3㎜~4㎜；
5、環境溫度 （10~40）℃；
6、相對濕度 ≤80%；
7、整機功耗 不大于500W。
三、全自動開口閃點測定儀儀器特點
1、本儀器采用彩色液晶大屏幕顯示，全中文人機對話界面，無標識鍵盤，對可預值溫度、試樣標號、大氣壓強、試驗日期等參數，具有提示菜單、導向式輸入功能。
2、模擬跟蹤顯示溫升與試驗時間的函數曲線，具有中文誤操作軟件提示修改功能，配有試驗日期、試驗時間等參數提示功能。
3、自動校正大氣壓強對試驗的影響并計算修正值。
4、微分檢測，系統偏差自動修正。
5、劃掃、檢測、打印數據自動完成，試驗臂自動升起和落下。
6、電子點火，強制風冷（注 手動點火按鍵位于儀器箱體左側）。
四、全自動開口閃點測定儀工作原理
本儀器在中華人民共和國標準GB/T 3536規定的條件下，把試樣裝入試驗杯，對裝有試驗油的試驗杯加熱，產生的石油蒸氣與周圍空氣形成的混合氣體在火焰接觸發生閃火時的zui低溫度，作為該試樣的閃點。
繼續試驗，直到用試驗火焰使試樣點燃并至少燃燒5秒鐘的zui低溫度，作為該試樣的燃點。
本儀器由單片計算機及外圍電路組成信號采集、處理、計算、輸出、控制等系統。工作時，根據傳感器所采集的溫度變化情況由CPU發出指令，控制加熱器，使試樣溫度按一定速率上升；掃描周期、點火時間、微分檢測等均實現自動控制。
當閃點被測出時，計算機系統停止數據采集，顯示閃點溫度并打印記錄結果；若需繼續測試燃點，則儀器繼續加熱，當燃點被測出并燃燒5秒后，蓋板自動關閉火焰，大臂自動抬起，實驗結束。
五、全自動開口閃點測定儀儀器成套性
1、儀器成套
| 序號 | 名稱 | 單位 | 數量 |
| 1 | 全自動開口閃點測定儀 | 臺 | 1 |
| 2 | 油杯 | 個 | 1 |
| 3 | 電源線（250V 6A） | 根 | 1 |
| 4 | 打印紙 | 卷 | 1 |
| 5 | 點火頭 | 個 | 5 |
| 6 | 點火器 | 把 | 1 |
I. Summary
The instrument is designed and made as per the National Standard of People’s Republic of ASTM/ D92,China GB/T3536 “Test Methods for Flash Point and Fire Point of Petroleum Products （Cleveland Open Cup Methods）”. It is suitable to determine the Cleveland open cup flash point of petroleum products, excepting fuel oils and petroleum products having open cup flash point lower than 79 ℃.
The instrument adopts SCM controlling technologies, colored LCD screen, man machine conversation interface, and blank buttons. The expected flash point, sample serial number, barometric pressure and test date can be preset. It has menu prompt and input guide function. It uses open, fuzzy control software, and modularization structure. It is advanced, friendly, convenient, and accurate, so it is the best choice of similar instruments. It has been widely used for petroleum products flash point and fire point test in the field of railway, aviation, power, petroleum, scientific research institutes, measurement and inspection department, and college and universities.
II. Main technical specification and parameters
1. Power supply: AC 220V±10%, 50 Hz;
2. Temperature measurement:
（1） Measurement range: room temperature～400℃;
（2） Repeatability: ≤4℃;
（3） Reproducibility: ≤8℃;
（4） Resolution: 0.1℃;
（5） Accuracy: 0.5%;
3. Temperature rising speed: as per GB/T3536;
4. Ignition mode: using an electron device to ignite. Gas flame of 3~4㎜ for flame application.
5. Ambient temperature: 10~40℃;
6. Relative humidity: ≤80%;
7. Total power consumption: not more than 400 W;
III. Instrument characteristics
1. The instrument adopts colored LCD screen, man machine conversation interface, and blank buttons. It can preset parameters, such as temperature, sample serial number, barometric pressure, and test date, etc. It has prompt menu and input guide functions.
2. It can show temperature-time curve. It has prompt function for operation error, and prompt function for test date and test time.
3. It can correct the effect of barometric pressure to the test and calculate the modified value.
4. It is with differential detection function. It can correct the system deviation automatically.
5. Flame application, flash point detection, and test data printing can be completed automatically. The test arm can be raised up and lowered down automatically.
6. It is with electron igniter and it has forcible wind cooling function （Note: The manual flame application button is at the left side of the instrument）.
IV. Working principle
Fill sample in the oil cup, and then heat the oil cup at the condition stipulated in the National Standard of People’s Republic of China GB/T3536. The flash point is expressed as the lowest temperature, when the gas mixture of oil sample vapor and the air around contacts flame and appears flash.
Continue to test, and take the lowest temperature when the sample is on fire and burns for at least 5 s as the fire point of the oil sample.
The instrument adopts SCM and outer circuit to form signal collection, processing, calculation, output, and control system. The CPU will send an order to control the heater as per the temperature change collected by the sensor so that the sample temperature can rise at a constant rate. The flame application, flame application interval, and flash detection can be automatically controlled.
When the flash point is detected, the instrument will stop collecting data. Then it will show flash point temperature and print out test data. If you need to determine the fire point, please continue heating the sample. When there is fire appears and the sample is burning for 5 s, the fire will be extinguished by the fire extinguishing plate. Then the arm will be raised up and the test is over.
V. Full set and technical documents
1. Full set
| No. | Name | Unit | Quantity |
| 1 | Main unit | Set | 1 |
| 2 | Oil cup | Piece | 1 |
| 3 | Power supply wire （250 V 6A） | Piece | 1 |
| 4 | Printing paper | Roll | 1 |
